Question: How Do I Reset My British Gas Smart Meter?

How do I read my British Gas smart meter?

How to take a reading on a smart meterThe screen will probably be off.

Press the red button to wake it up.Once it says Credit On you can press the red button again.The screen will say Meter Index.

That’s your meter reading..

How do I reset my British Gas Electric smart meter?

Press and hold the illuminated or green B button on your electricity meter….If your meter has three barcodes on it then here’s how to restore your electricity supply:Look at the meter reading screen on your electricity meter.Press A twice.Press B to restore the electricity supply.

How do I reset my smart meter?

How do I reset my smart meter in-home display? You can reset your in-home display if you have connection issues, or if it stops updating. Unplug it from the mains and hold down the power button on the back for five seconds. Wait one minute, reconnect to power and switch it on.

Why is my smart meter not working?

The smart meters are probably still working well. The IHD needs a good charge on its battery, or to be plugged in, also it needs to be quite close to the actual electricity meter. To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.

Why does my smart meter say waiting for current data?

Why does my display say ‘Waiting for current data’? Your IHD may be struggling to get a signal, so try moving it closer to your electricity meter. Restart the IHD by using the power button, and wait for the data to appear. If that doesn’t work, your meter may be struggling to connect to the network.

How do I pair my IHD with my smart meter?

You just need to give us a call on 0330 303 5063, so we can link your IHD to your smart meters. Once your IHD and smart meters are linked, press the on-off switch (the little black button on the left-hand side of your IHD screen), and lots of useful things will appear.

How do I check my British Gas smart meter balance?

Checking onlineAccess your account online.Choose your energy, gas or electricity account by clicking ‘Manage Account’ next to it.Your tariff will be below your balance on the left hand side of the screen.

How do I pair my smart meter display?

Press and hold the power button on the back of your smart meter display to turn it on. To turn it off, press and hold the same button for five seconds. Each time you turn the smart meter display on, it will show ‘Welcome to IHD2’ then ‘Attempting to pair’.

How do I reconnect my smart meter?

Manually Reconnecting your 2nd Generation Smart Meter using your IHDPress the menu icon (it’s in the bottom right of your screen).Press TOP UP.Choose the fuel you want to reconnect. … Press OK.Enter the 20-digit code you’ve got via email or text (you’ll get separate codes for electricity and gas).

Why is my British Gas smart meter not connecting?

If your smart energy monitor stops working check your power cable is inserted correctly and that your power supply is switched on at the wall. If it’s still not working, try using batteries. If batteries fix the issue, then the problem is with the cable.

Why is my smart meter flashing?

If it flashes once every 3 seconds, it’s searching for a WAN signal. If it’s flashing every second, or is off completely, that indicates a fault. The signal might be struggling depending on where your electricity meter is, or its surroundings (ie.